Aluminium paste is widely used in industrial coatings, automotive paints, plastic coatings, and printing inks to create metallic effects. However, the final appearance of a metallic coating depends on more than the amount of aluminium pigment added to a formulation.
Particle size and flake orientation are two important factors influencing the brightness, smoothness, sparkle, and visual consistency of aluminium paste applications.
For coating manufacturers and industrial buyers, understanding these characteristics can help improve product selection and achieve more consistent metallic finishes.

Particle size is one of the key specifications to consider when selecting aluminium paste.
Different aluminium flake sizes can produce different visual effects in the finished coating.
Fine aluminium flakes: Generally produce a smoother and more uniform metallic appearance.
Medium aluminium flakes: Can provide a balance between surface smoothness and visible metallic effects.
Coarse aluminium flakes: Generally create more noticeable sparkle and a stronger textured metallic appearance.
However, particle size alone does not determine the final result. Flake shape, thickness, distribution, formulation, and application conditions also influence the coating appearance.
When purchasing aluminium paste, buyers should review the particle size distribution rather than relying only on a single nominal size.
Aluminium paste consists of aluminium flakes dispersed in a carrier medium. The characteristics of these flakes influence how light interacts with the coating surface.
Important factors include:
Flake Diameter
The diameter of aluminium flakes affects the visual texture and distribution of metallic particles. Different diameter ranges can create different metallic effects.
Flake Thickness
Flake thickness is another consideration when evaluating metallic pigments. It can influence light reflection, coverage, and the visual characteristics of the coating.
Particle Size Distribution
A consistent particle size distribution helps coating manufacturers control the appearance of their formulations. Buyers should compare the supplier's technical specifications when evaluating different aluminium paste grades.
For applications requiring a specific metallic appearance, laboratory testing is recommended before confirming the final product grade.
Flake orientation describes how aluminium particles arrange themselves within a coating film.
This is closely related to the difference between leafing and non-leafing aluminium paste.
Leafing Aluminium Paste
Leafing aluminium flakes tend to orient near the surface of the coating film.
Typical characteristics include:
Strong surface metallic reflection
High brightness
A distinctive metallic appearance
Surface-oriented flake arrangement
Non-Leafing Aluminium Paste
Non-leafing aluminium flakes are distributed throughout the coating film rather than concentrating near the surface.
Typical characteristics include:
More uniform distribution within the coating
Flexibility in developing different metallic effects
Compatibility with a wide range of coating formulations, subject to testing
Suitability for various industrial coating applications
The choice between leafing and non-leafing aluminium paste depends on the desired appearance, coating formulation, and application requirements.
Different coating applications may require different aluminium paste characteristics.
| Application | Desired Metallic Effect | Important Considerations |
| Automotive Coatings | Smooth and uniform metallic finish | Particle distribution and flake orientation |
| Industrial Coatings | Consistent metallic appearance | Formulation compatibility and dispersion |
| Plastic Coatings | Uniform surface appearance | Resin compatibility and processing conditions |
| Printing Inks | Controlled metallic appearance | Particle size and printing process compatibility |
The appropriate aluminium paste grade should be selected according to the coating system and final application requirements.
There is no single particle size suitable for every coating application. Buyers should communicate their desired metallic effect and formulation details to the manufacturer before selecting a product.
When comparing aluminium paste products, coating manufacturers should review several important technical parameters.
|
|---|
A Technical Data Sheet (TDS) provides essential information for product evaluation. However, technical specifications should be considered together with actual application testing.
Even when two aluminium paste products have similar particle size specifications, their final coating effects may differ.
Factors such as resin selection, solvent compatibility, pigment concentration, mixing conditions, and film thickness can influence the final appearance.
Before placing a bulk order, buyers should:
Review the product's technical data sheet.
Confirm the intended coating application with the supplier.
Test the aluminium paste in the actual formulation.
Compare brightness, smoothness, sparkle, and coating uniformity.
Confirm the selected product grade and specifications before mass production.
This process helps reduce formulation risks and supports more consistent production results.
ZQ Metallic specializes in metallic pigment products, including aluminium paste for different industrial applications.
Whether you are developing industrial coatings, automotive paints, plastic coatings, or printing inks, selecting the right aluminium paste grade is important for achieving the required metallic appearance.
Contact ZQ Metallic to discuss your application requirements and obtain relevant product information.
ZQ Metallic
Website: https://www.zqmetallic.com/
Email: info@zqmetallic.com
Q1: Does smaller aluminium paste particle size always mean higher brightness?
No. Smaller particles may create a smoother metallic appearance, but brightness also depends on flake shape, thickness, orientation, surface characteristics, and coating formulation.
Q2: What is D50 in aluminium paste?
D50 is the median particle size. It means that 50% of the measured particles are smaller than this value under the specified measurement method.
Q3: What is the difference between leafing and non-leafing aluminium paste?
Leafing aluminium flakes tend to orient near the coating surface, while non-leafing flakes are distributed throughout the coating film. They are selected according to the desired metallic effect and formulation requirements.
Q4: Can the same aluminium paste be used for different coating applications?
Not always. Different coating systems may require different particle sizes, carrier systems, and leafing properties. Compatibility should be confirmed through testing.
Q5: What information should buyers request from an aluminium paste manufacturer?
Buyers should request a Technical Data Sheet containing particle size, particle size distribution, metal content, non-volatile content, leafing properties, and relevant application recommendations.